PLC精选简答（国外英文资料）.doc

PLC精选简答（国外英文资料） In 1985, IEC, the international electrotechnical commission, made the following rules for programmable controller: programmable controller is A digital operating system designed for use in an industrial environment. The SIMATIC s7-200 series of PLC data type checks is divided into full data type checking, simple data type checking, and numerous type checking The s7-200 series PLC has six high-speed counters, only one of which is HSC3 and HSC5 There are three types of timer, including TON, TOF, and TONR The Chinese full name of PLC is called programmable logic controller 6, PLC hardware: : PLC hardware mainly by the central processing unit (CPU), memory, input unit, output unit, communication interface and extended interface power supply parts. The way the PLC works: the way the PLC works: cycle scanning, centralized input, and centralized output The three command systems of the s7-200 series PLC are divided into trapezoidal program instructions, statement program instructions, and functional block diagram program instructions The data storage of the s7-200 series is a data store and data target The s7-200 series PLCs three command system form: : the trapezoid diagram program instruction, statement program instruction, function block diagram program instruction The working process of the PLC scan. Answer: (1) self-diagnosis; (2) the communication processing (3) scan input 4) the execution program (5) refreshes the output All instructions between the two instructions form a circular body. The data addressing mode of the s7-200 PLC command system has immediate number addressing, direct addressing and indirect addressing The output of PLC usually comes in three forms: relay output, two-way thyristor output, transistor output 16, the guiding idea of state programming? A: SFC programming general A. 3 elements: driver load, transfer condition, transfer target. The transfer condition and the transfer target are not missing, the driving load depends on the sp