siemens-hicom300E配置（国外英文资料）.doc

siemens-hicom300E配置（国外英文资料） 1, log in: CTRL + T, LOGON = ROOT, PASSWORD = HICOM. 2, exit or interrupt: CTRL + X; Data storage: EX - UPDAT: BP, ALL; Data backup: COPY -- DDRSM: A1, 1, E, 6, E (E - J); 5, basic verbs: ADD (increase), DEL (delete), CHA (change), REG (view), DIS (display), T (test), C (replication), ACT (open), DEA (closed); 6, basic nouns: SCSU extension (simulation), PERSI (password) and SA (line), ACSU (switch), SBCSU (digital extension), COSSU (trunk), the COP (signaling), TAPPO (key), FEASU functional management (system). Siemens hicom300Es configuration tool, comtes AMO instruction The basic maintenance of the switch is through the COMTES/ComWin maintenance software for its operations and maintenance management. Click on the COMTES/ComWin icon in the maintenance terminal and enter the interface. , after pressing CTRL + T type __user________, type in __hipath______ appear PASSW = and , can use the AMO instructions for its operation. Exit the COMTES operation: press CTRL + X and ESC to select Y to return to the maintenance terminal desktop. Exit the ConWin operation: press CTRL + X and Exit button, or simply close the action window, then return to the maintenance terminal desktop. If you dont have the COMTES or COMWIN programming software, you can use WINDOWS super terminals, but the return key must be replaced by CTRL + C. The AMO command syntax structure: Verb + instruction: parameters, parameters,... , the parameters; Commonly used verbs: ADD : create new data: add-scsu CHA : modify the current data example: CHA - COSSU DIS : look at the current data example: dis-acsu DEL : deletes the current data example: del-wabe REG: regenerating current data: REG - ACSU EXE: execute the processing example: EX - UPDAT STA : start the processing example: sta-info DEA : closing: DEA - DSSU ACT: ACT: ACT - DSSU Commonly used instructions: ANSU exchange unit database number DIMSU opens the database space UCSU sets the functional unit BCSU sets the circuit board W