2008年网络试题（国外英文资料）.doc

2008年网络试题（国外英文资料） 1, fill in the blanks (1 minute, 30 minutes) The data communication process is divided into five stages, in which the second phase is () and the fifth is (). In data transmission, there is a need to take some measure of unified transceiver action in order to ensure that the data is received accurately, which is called () technology. The data transmission rate of the audio modem (modem) is used () b/s (or BPS). The electrical properties of the osi physical layer determine the transmission () and (). The eia rs-232c interface standard stipulates that its interface signal 0 is greater than () voltage, and the rating is () volt. According to the eia rs-232c interface standard, the signal for the connectors foot number 4 is (); The signal for the connectors feet 2 is (). IBMs SDLC, iso HDLC, ccitts x.25 belong to () type of communication control procedures. In the exchange (transfer) method used in the osi reference mode network layer, the information transfer between any two points passes through the () node. Storage exchange is a type of the osi reference pattern network layer information exchange, which is divided into () and () two forms. Users are using virtual circuit services to provide the users own and receiving () address. In the session layer, the session can allow the user to enter () the system or send a file between (). The main computer interfaces with the network in two ways, namely () connection and (). The communication processor is the main hardware device for the communication subnet, which is generally held by one () or (). The LAN can use a variety of communication media, such as (), (), or (). 15. Ieee802 LAN protocols compared with osi reference model, the main difference is that corresponding to the link layer of the osi standard ieee802 will be divided into the control sublayer () and () control sub-layer. Ethernet is the () structures LAN, which is designed primarily for () services. The loop of a circular LAN is a channel of