针式打印机和热敏打印机的区别（国外英文资料）.docVIP

针式打印机和热敏打印机的区别（国外英文资料） The principle of thermal printer The working principle of thermal printer is equipped with print head semiconductor heating elements, the print head heat and contact thermal printing paper can print out the need to design, the principle is similar to thermal fax machines. The image is produced by heating and producing chemical reactions in the membrane. This thermal printer chemical reaction is done at a certain temperature. The heat will accelerate the chemical reaction. When the temperature is lower than 60 ℃, the paper takes quite long, even for a few years time to become dark; When temperature is 200 ℃, this will be done within a few microseconds. The thermal printer is selectively heated at the location of the thermosensitive paper, resulting in the corresponding graphics. Heating is provided by a small electronic heater on the printing head that is exposed to thermally sensitive material. Heater in article points or thermal printer form logic control by printer, when driven by the thermal paper produce a corresponding graphics and heating elements. The same logic circuit that controls the heating element, while also controlling the paper, can be printed on the entire label or page. The most common heat sensitive printer USES a fixed print head with a heating lattice, with a printing head of 320 square points, 0.25 mm by 0.25 mm per point. Using this lattice, the printer can place the printing point on any location of the thermal paper. This technique has been used on paper printers and label printers. [editing this section] the application of thermal printer Thermal printing technology was first used in fax machines, and its basic principle is to convert the printer received data to the signal control of lattice thermal unit heating, heat sensitive coating on the thermal paper heat enhancement. At present, the thermal printer has been widely used in POS terminal system, banking system, medical instrument and so on. [editing this paragrap