公证行验货培训资料 INSPECTION CRITERIA-GENERAL MERCHANDISE_r1.doc

A. Defect Classification DEFECT DESCRIPTION CRITICAL MAJOR MINOR 1. Shipment Packaging (refer to Section Carton Checking) 2. Selling Packaging Accessible sharp point or edge that may injure the user / purchaser * Blood stain * Foreign substance refer to Foreign Substance Table Deformed unit packaging material * * Irritating smell * Loose fastening or sealing * * Loose packing, insufficient stuffing or fixing inside selling packaging * * Missing / Incomplete component * The information on selling packaging does not match actual product * Torn / Damaged / Wet unit packaging material * Unstable / Asymmetric selling packing that will fail to display * 3. Labeling, Marking, Printing Missing / Wrong / Incomplete label or statement of warning / safety marking * Missing required marking such as UL, ETL etc. * Missing country of origin marking if required * Missing Importer / distributor name and address within destination country if required * Color variation of printing within one unit or unit to unit * * Label curled, poor adhesion of label * * Label peeled off * Missing, incomplete or wrong marking / label / hangtag / instruction sheet / manual * Poor / unclear printing on labeling or unit packaging material * * Scratched label / printing * * Statement cannot meet destination country language requirement, such as English plus French required for Canada shipment, German required for Germany shipment * Poor printing of barcode * 4. Material 4.1 Plastic Color deviation * Deformation, warpage, twist * Flow mark * * Gate flash or flash at pull pin / push pin * * Short shot * * Shrinkage * * Unclear molding text / logo * Uneven hardness of side wall of rotation molding product * * Uneven thickness * Weld line * * White mark, white texture * * Adhered soft flash * Color molding * Embedded dirt, mold in dirt * 4.2 Metal Flash, spur * * Improper edge folding cause to s