【2017年整理】德国蛇牌双极电凝器GN160.pptVIP

双极电凝镊使用技巧 高质量的产品需要更精心的呵护， 严格按照以下操作方法，可使双极镊子的头端保持不粘： 光滑和无损伤的头端： 只使用光滑并无损伤的镊子，任何表面有刮痕或者不平坦的镊头都会造成不同程度的粘连，应将镊头呈现颗粒状或将已粗糙的镊子送回厂家打磨。 在达到凝血效果的前提下，使用最低功率： 大功率输出容易损坏电凝工具，并且导致组织的过早碳化（粘连发生的原因），这会造成电凝镊头端的损坏。要达到相同的凝血效应，双极电凝需要的输出电量只为单极电凝的20-30%。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Electrosurgery is delivered by two (2) different methods: Bipolar-electrosurgery where current flows between two (2) bipolar electrodes that are positioned around tissue. Current passes from one electrode, through the desired tissue, to another electrode, thus completing the circuit without entering any other part of the patient’s body. Monopolar-electrosurgery that directs current from the electrode at the surgical site through the patient’s body to the return electrode(ground pad) at another site on the patient’s body. Any-where in the circuit where current is concentrated, heat can be generated and thus a potential thermal effect. This may be intended or unintended. The waveform in most Valleylab generators is a continuous waveform. In some other bipolar units the waveform is interrupted. The purpose of both methods is to produce heat to achieve the desired tissue/clinical effect. 蛇牌双极电凝系统 陕西陆洋医疗器械有限公司 杨世伟Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 双极工作原理 主机功能 器械配套 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 什么是电外科 双极工作原理 外科手术涉及人体多个系统的解剖 术中出血的控制无法依靠生物体自身止血机制 哈弗大学的Bovie 博士在1926 创造了电外科 以设备和器械达到切割和止血等功能 广泛应用于各外科领域 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 电外科应用 双极工作原理 电外科的频率范围 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 As