CONFIG设置(外国英文资料).docVIP

CONFIG设置(国外英文资料) At the time of using Pro/ENGINEER, a lot of the default Settings need to be done in the Config, so how to reasonable setting, impact on the Pro/ENGINEER working environment is very big. So what do you need to set in Config? In fact, Config is the default parameter to change the boot of the software, and then you have the xxxproeWildfire 4.0 text file directory. General Settings are as follows: One, the benchmark display: can set the base plane, the base axis, the reference point, the coordinate and so on the default display of the thumping. Display_axes no Display_coord_sys no Display_planes no Display_points no Model_note_display no User template Settings: set the user default model file template; Template_designasm D: proeWildfire 4.0 pro_stbstempture_file_dirmmks_asm_design Template_sheetmetalpart D: proeWildfire 4.0 pro_stbstempture_file_dirmmks_sheetmetal_part.prt.2 Template_solidpart D: proeWildfire 4.0 pro_stbstempture_file_dirmmks_solid_part.prt.5 3, the configuration catalogue: the Format catalog of the project, the catalogue of materials, the catalogue of the custom symbols, the catalogue of the Trail files, the catalogue of comments, etc. Pro_format_dir D: proeWildfire 4.0 pro_stbsFormat_new_dir Pro_symbol_dir D: proeWildfire 4.0 pro_stbssymbol Pro_note_dir D: proeWildfire 4.0 pro_stbsnote_dir Pro_library_dir D: proeWildfire 4.0 pro_stbsProLibs Pro_catalog_dir D: proeWildfire 4.0 pro_stbsProLibs Tolerance_table_dir D: proeWildfire 4.0 pro_stbstol_tables Format_setup_file D: proeWildfire 4.0 pro_stbsdtl_dirformat.dtl Trail_dir E: ProE 4.0 Work Pro_font_dir D: proeWildfire 4.0 pro_stbsfont_dir Configuration file: project diagram configuration file, model style configuration file, format configuration file, menu configuration file, etc. System_colors_file D: proeWildfire 4.0 pro_stbssysco.scl Drawing_setup_file D: proeWildfire 4.0 pro_stbsdtl_dirgongchengtu.dtl Format_setup_file D: proeWildfire 4.0 pro_stbsdtl_dirformat.dtl 5, custom shortc