565K喷涂要求.pdf

家庭备用电源喷漆性能参数 The Purpose Of This Specification Is To Define The Minimum Paint Performance Criteria For Any Coatings Applied To Home Stand-By Products Which Could Include Stand-By Generator Sets, Automatic Transfer Switches, And Power Management Products With NEMA3R Rating Or Higher By Any Manufacturing Facility. This Specification Applies To Both Ferrous And Non-Ferrous Metal PartsAnd Components. 该参数用于定义备用电源产品喷漆的最低喷漆性能标准，其中包括有备用发电机，ATS, 或任何 制造商生产的NEMA3R或者更高的电源管理产品，该参数同时适用于亚铁和非亚铁的金属零件盒 部件 All TestsAre To Be Conducted On Parts Prepared By The Manufacturing Facility, Which Have Been Treated In The Manufacturer’s Current Pre-treatment Washer Process. 所有测试用的零件都是由制造商的设备生产出来，在制造商现有的预处理中完成冲洗过程 1. COLOR: 1. COLOR: 11.. CCOOLLOORR:: ASTM D-523, 60?On Gloss Meter, Macbeth 75-B Spectrolight Booth. 1. 颜色 ASTM D-523, 60℃ 光泽仪， Macbeth 75-B Spectrolight Booth Color Tolerances And Acceptability Will Be Controlled By Visual Matching In A Macbeth 75-B Color Spectrolight Booth or Equivalent. All Color Standards Shall Be Reviewed Every 2 years To Assure Quality Color Matches. 色差和合格率将根据Macbeth 75-B Color Spectrolight Booth或者相近的其它颜色进行视 觉匹配，所有颜色标准将进行两年一次的检查以确保颜色的质量匹配 Gloss Readings: Gloss Readings: GGlloossss RReeaaddiinnggss:: Will Be Made On Briggs Stratton Panels Prepared In Accordance With Production Specifications Using ASTM D-523. All Colors Will Be At Customer Specification (? Degrees) Gloss TakenAt 60?On Gloss Meter. 光泽度显示：将会根据百利通准备的色板配合产品参数采用ASTM D-523。 所有颜色 将根据客户需要（±5度）光泽度在 60℃ 光泽仪 D.O.I.: D.O.I.: DD..OO..II..:: ASTM D-523 at 20?On Gloss Meter. D.O.I D.O.I DD..OO..II ASTM D-523 20 ： ℃光泽仪显示 2. HIDING POWER: 2. HIDING POWER: 22..HHIIDDIINNGG PPOOWWEERR:: All Colors Must Provide Complete HidingAtA Cured Film Thickness Of 2.0 MILS. 2. 遮盖力