2012年TI杯msp430单片机电压值幅度值菜单显示程序(国外英文资料).doc

2012年TI杯msp430单片机电压值幅度值菜单显示程序(国外英文资料) I before it is done, but the program still problems, when the transfer time is easy, but the normal walking to normal. Development environment for IAR, microcontroller F149 display with the 1602 of the four line mode. Are you looking to change their procedures, in fact I was 51 on the transplantation of the past. The tragedy, not under the posts. I posted on my blog ah, go to your own. main program __________________________ separator ____________________________________ #include msp430x14x.h #include ds1302.h #include LCD1602x4_mps.h #define DS1302_SECOND / / 0x81 position register clock chip, storage time #define DS1302_MINUTE 0x83 #define DS1302_HOUR 0x85 #define DS1302_WEEK 0x8b #define DS1302_DAY 0x87 #define DS1302_MONTH 0x89 #define DS1302_YEAR 0x8d Unsigned char DateString[11], TimeString[9], week_value[2], TempBuffer[7]; / / Char hide_sec, hide_min, hide_hour, hide_day, hide_week, hide_month, hide_year; Char done, count, temp, flag, up_flag, down_flag; //unsigned int temp_value=0, temp_max=0; temp_min=0; / / temperature value Void DateToStr (void) / time year, month, day, week data into LCD string into the array in DateString[] {unsigned char Year, Month, Day, Week; (Year=rtc_getyear); (Month=rtc_getmon); (Day=rtc_getdate); (Week=rtc_getday); If (hide_year2) / if here, the else statement is a judgment of flash, 2 display data, 2 is not displayed, the output string is 2007/07/22 { DateString[0] =2; DateString[1] =0; DateString[2] = Year/10 +0; DateString[3] = Year%10 +0; } Else { DateString[0] = ; DateString[1] = ; DateString[2] = ; DateString[3] = ; } DateString[4] = /; If (hide_month2) { DateString[5] = Month/10 +0; DateString[6] = Month%10 +0; } Else { DateString[5] = ; DateString[6] = ; } DateString[7] = /; If (hide_day2) { DateString[8] = Day/10 +0; DateString[9] = Day%10 +0; } Else { DateString[8] = ; DateString[9] = ; } If (hide_week2) { Week_value[0] = Week%10 +0; / / week data also in the week_value[] array, wit