ty3(国外英文资料).doc

ty3(国外英文资料) TY3-D (S) hydraulic 2011-05-20 18:41:28| classification: classification | Tags: | default font and subscriptions. One, overview: The hydraulic station is for brake and supporting the use of it, and a brake braking system is an important guarantee for the hoist and the safety of personnel and equipment, reliable operation. The hydraulic station is designed as an independent structure, namely each hydraulic station a total of 2 sets of pump unit, 2 sets of pressure regulating device, independent of each other, mutual influence, were set up on a tank. One of them, a set of spare. The conversion between them through the electrical control system to switch. Another feature of the hydraulic station: all kinds of hydraulic components are in the outside of the oil tank, maintenance does not need to open the fuel tank cap can handle the fault. TY3-D (S) the main function of hydraulic station: (1) provide the hydraulic oil pressure can be adjusted, control brake release and braking, the braking torque was different, lifting machine operation, deceleration and stop. (i.e. working brake) (2) to provide pressure oil double cylinder single rope hoist rope adjusting device, the rope adjusting clutch is opened or closed according to need; (3) in the case of accidents, safety braking, and according to the actual need, can make the elevator to get two braking effect, to ensure the safety of the system. Two main technical parameters: The maximum brake oil pressure 6.3MPa (65 kg / mm) The maximum amount of oil (total export volume of 9 liters / minute). Tank volume 490 liters The working temperature is less than 65 DEG C Q/SY8049-79S 30D low grade brake oil condensate hydraulic oil Electro hydraulic pressure regulating device allows the maximum input current 250mA Three working principle: TY3-D (S) hydraulic station is composed of two parts, braking and safety braking. The work is part of the brake by the oil pump, oil filter and pressure parts. Safety brake part is compose