数码摄像机原理与常见故障的解决方法(国外英文资料).docVIP

数码摄像机原理与常见故障的解决方法(国外英文资料) A, the type of digital video camera malfunction Digital camera malfunction phenomenon is multifarious, in view of the different models appear problem, the solutions to the specific methods have some subtle differences. But there are several broad categories. The picture is bad when the camera is shot. This kind of failure can be subdivided into three general conditions, one is the picture of the viewfinder and the TV shows are not ideal, is usually the cause of the failure in the camera circuit; Second, the image of the viewfinder image is normal and the TV display is bad. This condition is usually caused by AC adapter or line connection. Three is the television image is normal and the viewfinder image is bad, the cause of this situation is usually caused by the viewfinder. The image is not natural. If normal and monitor image recording tape five color or color, in general fault occurred in the video part: on the contrary, if the recording tape to image is not normal, normal and monitor for the AC adapter or improper connection. If both are bad, the fault lies in the camera circuit. The image is blurred and the focus is not good. If manual focus is good, and automatic focus is bad, it usually fails in the automatic focus circuit. If manual and automatic focus are not good, the fault is mainly in the lens focus component. Replay the image without sound. In this case, you can put the tapes in normal normal video recorders and listen to the sound effects. If the associated sound is normal, it fails in the AC adapter; In contrast, the fault is in the audio recording circuit or microphone and microphone circuit. The whole machine doesnt work. After turning on, each keystroke has no effect, the viewfinder is light and the box is not moving. This type of failure is usually caused by an abnormal power supply or power circuit. The battery voltage or AC AC adapter should be checked before the output voltage is normal, if normal fault is in the power