机械压力机 安全技术要求(国外英文资料).docVIP

机械压力机 安全技术要求(国外英文资料) Safety requirements for mechanical press JB 3350 - 93 Peoples Republic of China machinery industry 1993 - 03 - 31 approved the implementation of 1994 - 01 - 01 1, the subject content and scope of application This standard specifies the safety technical requirements of mechanical press products (hereinafter referred to as press) and its safety accessories. This standard applies to the evaluation of the safety technical level of the press and the safety technical supervision. This standard does not apply to screw presses. 2 citation criteria GB 2893 safe color GB 2894 safety signs GB 4053.1 fixed steel straight ladder GB 4053.3 industrial protective railing GB 4053.4 industrial steel platform General principles for safety and hygiene design of GB 5083 production equipment General specification for electric equipment of GB 5226 machine tools Guidelines for the use of GB 6527.2 safe colours General specification for JB 1829 forging machinery JB 3240 graphic symbols for operation instructions of forging machines JB 4203 safety technical requirements for forging machinery 3 responsibility for performance standards 3.1 press host factory responsibility The press main machine manufacturer shall bear the following responsibility for the safety of the press in the factory: A. product design drawings, manuals and technical documents must comply with the requirements of GB 5083 and this standard, and the drawings, technical documents, etc. that are commissioned by the outside shall also be in conformity with the provisions of this standard; The safety protection devices, monitoring and interlocking system, safety components and random operation accessories selected on the B. press machine shall be inspected according to the acceptance standard. These devices and devices must be in conformity with the requirements of this standard after assembly, adjustment, and user use. 3.2 responsibility for safety protection devices and safety accessories manufacturers