柱塞泵选型(国外英文资料).docVIP

柱塞泵选型(国外英文资料) Introduction and selection of piston pump High pressure mud conveying and plate and frame filter press are the key processes in nonmetal production. Mud flows under high pressure and wears very badly. The ordinary pump can not be applied under these conditions. In order to solve this difficult problem, the ceramic hydraulic plunger pump has the advantages of high outlet pressure, good wear resistance and convenient maintenance. Ceramic hydraulic plunger pumps were first used in ceramic production to transport slurry to spray drying towers. Now, there is no ceramic vacuum pump for producing ceramic spray drying towers. At present, the pump is widely used in ceramics, electrical porcelain, non-metallic, chemical and other fields. In order to make better selection and use of ceramic hydraulic piston pump, the basic selection methods are introduced as follows: First, the model and classification of piston pumps The pump is divided into high-pressure pumps, low pressure large flow pumps and variable pumps, the same specifications are divided into ordinary pumps and corrosion resistant acid pump. High pressure pump is suitable for long distance or to high-altitude conveying slurry; low pressure large flow pump for stable large conveying slurry; variable pump is suitable for use with all kinds of filter press filtration device, the pump as the automatic filter density increases the pressure increased the dead flow reduction. Two 、 selection of piston pump Piston pump is mainly used for conveying ceramic slurry, coal slurry, kaolin and non-metallic mineral suspension, can also be used for conveying slurry, mine slurry, chemical food suspensions of magnetic materials, transportation of solid content is greater than 70%, the variable pump equipped with filter machine has the advantages of high efficiency and energy saving efficiency. Selection should pay attention to the following points: 1, determine the conditions, the plunger pump does not allow large particu