汽车驾驶标准(国外英文资料).docVIP

汽车驾驶标准(国外英文资料) Driving standards (general part) I. inspection before starting: Check before power on: 1, check the tank cooling water (winter antifreeze) to the water inlet; 2. Check the oil in the range of the ruler; 3, check the front and rear wheel fastening bolts are not loose; 4, check the drive shaft, front and rear connecting bolts are not loose; 5, check the tire pressure (empty car state, there are four rounds of flowers to the ground); 6, check the steering gear screw is not loose; (two) check after power on: 1. Switch on the power switch, insert the start key and turn to the position; 2, check the lights, brake lights, anti fog lights, reversing lights, headlights, front small lights effective; 3, check wipers, speakers effective; Two 、 after starting and starting: 1, check the handbrake taut, empty file; 2, step down the clutch, the appropriate fuel door or non oil door, turn the starting key to the starting position, the time does not exceed 5 seconds, if not starting, restart again with the previous starting interval of more than 10 seconds; 3, check the oil pressure gauge, barometer, fuel table, power generation indicator and other instruments effective, sufficient fuel; 4, after the normal pressure, check the brakes effectively; Three, driving: 1, before starting, turn on the left turn signal, in the non forbidden honking area, sing two speakers, gear, slow loose clutch, side light oil door, start driving, then try again, brake should be effective; 2, passenger cargo not surchage, not to overload, high overload, (so,), the goods (rope tied up each lock, each trunk hook bundle a), bulky goods plus anti mobile accessories, small goods to cover every cloth, bulk goods cover cover, not around the leak; passenger and cargo loading can not be mixed; 3, traffic, traffic, traffic according to the command signal is not speeding, overtaking is not super car, ensure the safety of overtaking; according to the weather and road conditions, keep a safe distance fro