网络布线施工(国外英文资料).docVIP

网络布线施工(国外英文资料) On a large scale building or communication network system wiring, rely on network technology personnels strength is not enough, also need the construction personnel in the wiring system engineering, and the construction personnel on most of the network or computer knowledge nothing, they will often take a telephone line, network cabling and confused the line and other lines, so these workers in the specific wiring, will not consider all the details of the network layout, for example between the cable and the interface module connected between the cable and the cable connected with the first crystal and the network connection and other details, if these construction workers do not strictly ensure the quality of construction, do not pay attention to these the details of the treatment, a great impact on the network transmission performance will. For users, the only means of detecting cable layout quality, is in the routing completion, simply use the network to detect the command Ping - under the network connecting situation, as long as the Ping network if you think the wiring work would be qualified. In fact, network cabling, and not simply check whether the network connectivity is so simple, but also need to look at the network transmission speed is reached the nominal value of network products, will be a wiring construction quality is not good in the transmission speed greatly reduced. In addition, we must pay attention to comprehensive examination of the cable system layout, such as the first through the network cable tester see 8 cable cable connection sequence and test whether is this test for ordinary users can also be very convenient, as long as the purchase of a detector can be. Test system for large scale network, higher requirements for the transmission of the signal, the overall losses must also be connected to the special testing instrument meter check points, if the loss in signal, so the construction quality must not pass, in addition to th