l离心式风机检修(国外英语资料).docVIP

l离心式风机检修(国外英文资料) Maintenance of centrifugal fan (2009-11-09 21:54:15) reprint print Tags:. instructional objective Master of centrifugal fan and axial flow fan maintenance requirements and procedures, understand the process standard fan repair, maintenance method of familiar fan component. Content of courses Maintenance, centrifugal fan (a) before the maintenance inspection The fan in the repair before, should be checked at runtime, so as to understand the defects of fan exist, and recording relevant data for maintenance. Test. The main contents of inspection: (1) the vibration and temperature measurement of bearings and motor lift. (2) check the bearing oil seal. The sliding bearing wind machine, should work to check the oil and oil system and cooling system of quality. (3) check the tightness of the shell of the fan and the air duct flange. Outside the entrance baffle connection is good, the switch is flexible. (4) understand the relevant data of fan operation, when necessary, efficiency testing machine style. (two) the maintenance of fan 1. impeller overhaul After the collapse of the first fan, clean dust and dirt on the impeller, and then carefully check the degree of wear of impeller, wear and rivet fastening, and Weld sealing off, and pay attention to the sealing ring and the impeller casing air inlet ring has no friction marks, because the minimum gap, if the assembly position or fan operation due to thermal expansion, will cause the occurrence of friction. For local grinding impeller wear, available iron welding, plate thickness is no more than the thickness of the impeller is not worn before, its size should be able to wear Cover the hole. For if the rivets, rivet head wear can be surfacing, if loose rivets, should be replaced. For weld wear or desoldering impeller and blade, can be repaired or patching. A small area of wear by welding, large area wear the scarf. (1) welding blade. Welding should be used welding performance and good toughness electrode. The