中石北京 事故调查与分析 第一阶段在线作业(国外英语资料).docVIP

中石北京 事故调查与分析 第一阶段在线作业(国外英文资料) Homework First items of combustible material (more), the more easily burning fire. Your answer: A Topic score: 0.5 This score: 0.5 Comments: to understand the combustion characteristics of material The second problem is actually a ductile fracture of material microstructure in the void formation and (process). Your answer: D Topic score: 0.5 This score: 0.5 Note: the fracture process Third components of ductile fracture, the fracture and the principal stress direction (a). Your answer: B Topic score: 0.5 This score: 0.5 Note: macro morphology of fracture Fourth in accordance with the classification of metal component failure, failure is excessive deformation, failure (failure) and surface damage. Your answer: D Topic score: 0.5 This score: 0.5 Note: an important classification of failure Fifth metal in the process of condensation due to volume shrinkage in casting or ingot core forming a tubular or trumpet shaped or scattered holes is (). Your answer: A Topic score: 0.5 This score: 0.5 Note: casting defects Sixth according to the damage degree classification, loss of working days (below) on the definition of disability injury as minor injuries. Your answer: C Topic score: 0.5 This score: 0.5 Note: a measure of damages Seventh common classification of production safety accidents, major accidents caused by the () (with) more than death accident. Your answer: B Topic score: 0.5 This score: 0.5 Note: the classification of safety accidents Causes of electric fire and explosion eighth questions have high temperature, electric spark and (). Your answer: B Topic score: 0.5 This score: 0.5 Note: the reason of electrical fire Ninth questions at a certain temperature, mixed gas and flame contact with flammable and combustible liquid on the surface of the vapor and air, can spark, then extinguished instantaneously (combustion process). Your answer: D Topic score: 0.5 This score: 0.5 Note: a form of combustion Tenth component corrosion in the corr