施工员填空题集锦(国外英语资料).docVIP

施工员填空题集锦(国外英文资料) 09 years of construction staff exam mock test questions Construction technology examination paper A roll First, a radio question (1 points per subject) 1, cold drawn steel joints should be flash butt welding. A. before cold drawing, B. cold drawing C. can not be welded, D. can be drawn before and after cold drawing 2, pumping concrete gravel, the maximum particle size shall not exceed the diameter of the transmission. A.1/2 B.1/3 C.1/4 D.1/5 3, mass concrete pouring, fully layered to adapt to. A. plane size should not be too large, B. length is longer, C. thickness is small, D. area is larger 4, the construction of slurry retaining wall bored pile, the role of the protective cylinder is. The A. guiding function B. increases the head C., and protects the orifice D.A, B, and C 5, the bulldozer for economic distance. A.100, m, B.50m, C.70~100m, D.30~60m 6, the role of steel cold drawing is. A. increases the yield point B. and increases the steel C. in order to produce the prestressing D. for straightening 7, mass concrete pouring, internal and external temperature difference shall not be greater than. A.5.C B.10. C C.15. C D.20. C 8, can use Phi 12 steel instead of 7 Phi 10 reinforcement. A.5 root, B.7 root, C.8 root, D.6 root 9, fine stone concrete rigid waterproof roof thickness should not be less than. A.30mm, B.,.40~50mm., C.45mm, D.,.45~50mm 10, regenerative maintenance is adapted to. A. outdoor temperature is not less than 15. C B. below ground engineering C. body ratio is not greater than 10m 1 D.A, B, C, are 11, in order to ensure the concrete can be pumped, concrete per cubic meter of cement is not less than. A.280kg B.300kg C.350kg D.500kg 12, rigid multilayer waterproof layer, play a waterproof role is. A. structure layer, B. mortar layer, C. plain cement mortar layer, D. surface layer 13. The amount of water that fills the soil to achieve maximum density is called. A. the best water content B, maximum water content C, water content D, minim