减速箱设计与运动仿真二级圆柱圆锥本科论文.docVIP

摘 要 齿轮减速器是一种广泛应用在各行各业，是一种非常普遍的机械装置。现在的减速机械装置通常体积很庞大，或者还有的机械传动效率低下的问题。 本设计讲述了带式运输机的传动装置——二级圆柱齿轮减速器的设计过程。首先进行了传动方案的评述，选择齿轮减速器作为传动装置，然后进行减速器的设计计算（包括选择电动机、设计齿轮传动、轴的结构设计、选择并验算滚动轴承、选择并验算联轴器、校核平键联接、选择齿轮传动和轴承的润滑方式九部分内容）。运用AutoCAD软件进行齿轮减速器的二维平面设计，完成齿轮减速器的二维平面零件图和装配图的绘制 本次设计综合运用机械设计、机械制图、机械制造基础、几何精度、理论力学、材料力学、机械原理等知识，进行结构设计，并完成带式输送机传动装置中减速器装配图、零件图设计Abstract The gear reducer is a kind of widely used in all walks of life, is a very common mechanical device. Deceleration mechanical device now usually volume is very large, or mechanical transmission efficiency is low and the problems. The design process of the design on the transmission of two conical cylindrical gear reducer of conveyor belt. First review of the transmission scheme, selection of gear reducer as the driving device, and then calculate the design of speed reducer (including the selection of electric motor, gear shaft design structure design, selection and calculation of rolling bearing selection and checking, checking, coupling flat key connection, selection of gear and bearing lubrication of nine parts). Planar design using AutoCAD software for gear reducer gear reducer, completed the 2D part drawings and assembly drawings. And the use of 3D SolidWorks software modeling and assembly of parts, the motion simulation of the reducer work process. The design of the integrated use of mechanical design, mechanical drawing, mechanical manufacturing base, geometric accuracy, theoretical mechanics, material mechanics, mechanical principles, structural design, and completes the design of the reducer assembly drawing and part drawing belt conveyor device. In this paper, through the selection and calculation of the motor reducer output power. Through the calculation of gear tooth surface contact fatigue strength of the tooth root bending fatigue strength, the calculation of the allowable bending stress calculation method to check the shaft diameter. Keywords motor reducer gear 目 录 摘 要 1 Abstract 2 目 录 3 绪论 4 第1章 设