数控机床主轴有限元分析本科论文.docVIP

分 类 号 密 级 宁大学 毕业设计(论文) 数控机床主轴的有限元分析 所在学院 专 业 班 级 姓 名 学 号 指导老师 年 月 日 诚 信 承 诺 我谨在此承诺：本人所写的毕业设计（论文）《XXXXXXXX》均系本人独立完成，没有抄袭行为，凡涉及其他作者的观点和材料，均作了注释，若有不实，后果由本人承担。 承诺人（签名）： 年 月 日 摘 要 数控机床主轴是决定加工质量和切削效率的重要因素。, 主要包括有限元法、传递矩阵法、阻抗耦合法、实验法等。指出了主轴系统结合部的动力学建模与参数辨识是研究主轴系统动态特性的关键问题。最后，简要论述了主轴系统动力学研究的发展趋势，即未来应从主轴系统的精准建模、动力学综合优化和动态测试及分析等方面进行深入研究。 关键词: 主轴系统; 动力学; 分析方法; 数控机床 Abstract CNC machine tool spindle static and dynamic stiffness is to decide the processing quality and cutting efficiency the important factor, that is, to a large extent influence the life of the machine, so the main processing design occupies an important position ANSYS is a general strong analysis software, this paper, by using ANSYS finite element analysis software and solidworks 3 d modeling software, combining to spindle dynamic and static simulation and analysis, based on the two kinds of software their a little, first in solidworks software set up 3 d model of the spindle, the 3 d model into parasolid - x_t format, will transform the model into ANSYS software of finite element model establishment, through the theoretical calculation to determine cutting load and constraint conditions, set its material parameters, and the grid division, conditions, after the completion of setting, it is concluded that the main solving static and dynamic analysis results, and the visual graphics, analyzed. CNC machine tool spindle system dynamic characteristics of the machine tool directly affect the machining precision and machining efficiency. In the paper the previous research results on the basis of numerical control machine tool spindle system dynamic analysis method are reviewed research. Introduces the characterization of spindle system dynamics characteristic parameters, basically have static stiffness, dynamic stiffness, limit cutting width, natural frequency and vibration mode and damping charac