气焊（割）工的安全操作规程.docVIP

气焊（割）工的安全操作规程 气焊（割）工的安全操作规程提要：焊（割）炬射吸情况正常后，用紧箍或细铁丝把氧气及乙炔气胶管扎紧在进气接头上，同时检查焊炬、割炬、其他各气体通道是否正常 更多精品：人事 气焊（割）工的安全操作规程 1、穿好工作服、劳保鞋，做好工作帽、护目镜。 2、严格遵守一般焊工安全操作规程，熟练掌握、遵守《焊接作业安全操作规定》和有关减压器、橡胶软管、氧气瓶、乙炔瓶的安全使用规则。 3、使用焊炬或割炬前必须检查其射吸情况，不正常的焊炬和割炬不能使用。 4、焊（割）炬射吸情况正常后，用紧箍或细铁丝把氧气及乙炔气胶管扎紧在进气接头上，同时检查焊炬、割炬、其他各气体通道是否正常，各部门接头的紧密性，以免漏气。 5、进行切割时，飞溅出来的金属微粒与熔渣微粒很多，喷孔很容易堵塞，应该常用通针通，以免回火。 6、停用时应关闭乙炔调节阀，然后关闭氧气调节阀，这样可防治发生回火和减小烟灰。 7、在使用过程中，如发现气路或阀门有漏气现象，应立即停止工作，清除漏气后才能使用。 8、焊炬、割炬及各种气体通道均不能沾染油污，以免氧气遇到油脂燃烧爆炸。 9、焊炬、割炬使用后应妥善存放。严禁将带气源的焊炬、割炬放在工具箱内，应挂在适当地方。 10、焊、割的工件表面如有厚锈、油污、烧碱、硫磺、甲苯等物资，特别上储存以上物资的容器，要彻底清洗干净，打开容器盖子通风换气确信不会发生危险时才能开始焊割工作。没有清洗干净的容器，绝对不允许焊割。 daily morning exercises or class-break setting-up exercise and discipline inspection and appraisal of public signs;2, daily cleaning and inspection;3, the daily student school appearance, dress, wearing school card check;4, the daily duty guide to the leadership class discipline three rounds.Weekly moral education work:L, the flag raising ceremony and the national flag speech under the flag raising ceremony held on Monday;2, every week a class meeting, the meeting;3, every week two exercises, cleaning and hygiene, behavior norms, attendance situation published cloth appraisal, and the issue of the code of conduct;;4, weekly work week.Monthly moral education work:1, at least once a month, the theme of education activities, to patriotism education, behavior norms of education as the focus, combined with major retreat day.2, the monthly class quantization assessment and class teacher assessment, selection of behavior for the standard model class.Moral education in each term:1, at the end of each semester to form three good student, outstanding student cadres, civilized student.2, at least once a semester, parents will be.,Student etiquette conventionA, the school leavers1, dress neatly to wear school card, step posture correct, full of spirit; cycling of the same students, at the school gate and get off, go to th