发热保温冒口套点火剂的研究.pdfVIP

年 月 金属铸锻焊技术 · · 2009 6 Casting Forging Welding 发热保温冒口套点火剂的研究 余瑾，毛琳，李成业，王冬栋 （合肥工业大学材料科学与工程学院，安徽合肥230009 ） 摘 要：通过理论分析和一系列实验研究，选用镁粉、氧化剂JTY-1 和LYH-3 型粘接剂等为发热保温冒口套 的点火剂配方成分。 研究发现：当镁粉、JTY-1 和LYH-3 以质量比为5:6:1 且按一定混制工艺配制而成时，该点火 剂具有较好的发热效果。 对该点火剂在冒口套中的应用进行了研究，并就点火剂对冒口套整体发热效率的影响进 行了分析与讨论。 关键词： 冒口套 发热剂 点火剂 ; ; 中图分类号： + 文献标识码： 文章编号： TG244 .4 A 1001-3814(2009)11-0044-03 Research of Ignition Agent Used in Heat-preservation Riser-head YU Jin, MAO Lin, LI Chengye, WANG Dongdong (School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China) Abstract ： Based on the theoretical analysis and a series of exp erimental results, the organic reductant Mg, oxidant JTY-1 and adhesive LYH-3 were selected as the major component of the ignition agent which is used in the fever heat-preservation riser-head. And the results indicate that the new ignition agent has fine efficiency when its mass ratio of Mg, JTY-1 and LYH-3 is 5:6:1 and it is mixed with some procedure. In addition, the application of the ignition agent in the fever heat-preservation riser-head was researched with series of experiments. In the end, the heating efficiency of the heat-preservation riser-head with the new ignition agent was analyzed. ： Key words fever heat-preservation riser-head; exothermic compound; ignition agent 发热保温冒口套是在普通保温冒口套的基础