第七章 msp430f2618头文件.docVIP

/******************************************************************** * * Standard register and bit definitions for the Texas Instruments * MSP430 microcontroller. * * This file supports assembler and C development for * MSP430x26x devices. * * Texas Instruments, Version 1.4 * * Rev. 1.0, Initial Version * Rev. 1.1, changed PAREN from sfrb to sfrw * Rev. 1.2 added TLV in INFO Memory * Rev. 1.3, added definitions for Interrupt Vectors xxIV * Rev. 1.4, changed void __data20 * volatile definition * ********************************************************************/ #ifndef __msp430x26x #define __msp430x26x #ifdef __IAR_SYSTEMS_ICC__ #ifndef _SYSTEM_BUILD #pragma system_include #endif #endif #if (((__TID__ 8) 0x7F) != 0x2b) /* 0x2b = 43 dec */ #error msp430x26x.h file for use with ICC430/A430 only #endif #ifdef __IAR_SYSTEMS_ICC__ #include in430.h #pragma language=extended #define DEFC(name, address) __no_init volatile unsigned char name @ address; #define DEFW(name, address) __no_init volatile unsigned short name @ address; #if __REGISTER_MODEL__ == __REGISTER_MODEL_REG20__ #define DEFA(name, address) __no_init void __data20 * volatile name @ address; #else #define DEFA(name, address) __no_init volatile unsigned long name @ address; #endif #define DEFXC volatile unsigned char #define DEFXW volatile unsigned short #if __REGISTER_MODEL__ == __REGISTER_MODEL_REG20__ #define DEFXA void __data20 * volatile #else #define DEFXA volatile unsigned long #endif #endif /* __IAR_SYSTEMS_ICC__ */ #ifdef __IAR_SYSTEMS_ASM__ #define DEFC(name, address) sfrb name = address; #define DEFW(name, address) sfrw name = address; #define DEFA(name, address) sfrl name = address; #endif /* __IAR_SYSTEMS_ASM__*/ #ifdef __cplusplus #define READ_ONLY #else #define READ_ONLY const #endif /************************************************************ * STANDARD BITS ************************************************************/ #define BIT0 (0x0001) #define BIT1