控制超高层建筑桩筏基础筏板弯矩方法.pdfVIP

40 3 20103 1 2 2 1 3 4 4 巢 斯 , 赵锡宏 , 张保良 , 姜文辉 , 肖俊华 , 孔 娟 , 袁聚云 ( 1, 200092; 2 , 200092; 3 , 250101; 4 , 200092) [ ] , ( )-( ) , ,, , -( ) ,, [ ] ; ; ; ; ; Controlledmethodof momentinraft of piledraftfoundationforsuper-tallbuildings 1 2 2 1 3 4 4 Chao Si , ZhaoXihong , Zhang Baoliang , JiangWenhui , Xiao Junhua , Kong Juan , uan Juyun ( 1Architectural Design Research Inst.of Tongji Univ.,Shanghai 200092, China; 2 Shanghai Xinhua International Geotechnical Eng.Co. ,Ltd.,Shanghai 200092,China; 3 Shandong Jianzhu Univ., Jinan 250101,China; 4Tongji Univ.,Shanghai 200092,China) Abstract:To ensure the designed moment in raft of piled raft foundation for super-tallbuildings controlled in safe range, the back- analysis and the hybrid method on interaction between superstructure and foundation were used to calculate the moment in raft of piled raft foundation for Jinmao Building of 88-storey and Shanghai World Financial Center of 101-storey. The relative bending in raft for Shanghai Center Tower of 121-storey by the hybrid method was dealed with, and then the moments in raft of piled raft foundation were calculated by three methods: back analysis, hybrid method and iterative method on interaction between superstructure and foundation, respectively. Based onthe above calculated results of moment in raft, the comprehensive analysis of moment in raft of piled raft foundation for Shanghai Center Tower is made in order to ensure the designed moment in safe range. Keywords:super-tall building; piled raft foundation; raft moment; back-analysis; hybrid method; iterative method 0 , t 10 , : 1997