tecsis数显压力开关sc400,sc410,sc420(s2400,s2410,s2420-详解.PDFVIP

| Force | Pressure | Temperature | Switch SC400 / SC410 / SC420 Electronic pressure switch with a four digit LED display SC400 - with two switching outputs SC410 - with one switching output and an analogue output (4…20mA oder 0…10V) SC420 - with two switching outputs and an analogue output (4…20mA) Description Features The pressure switches SC400/SC410/SC420 with display O Adjustment ranges from -1 up to 700 bar provides continuous pressure monitoring and allows the configuration of the set points without pressurising. It is easy to O Sensing element ceramic or thin-film configure the switching point and reset point without O Repeatability 0.2 % pressurising, or to configure the type of contact (NO/NC), O Switching points, reset points and damping, delay and n-/p-switching. In addition, authorised personnel can quickly and easily access the user menu to alter switching function (NO/NC) and the switching points. In series S2410 and S2420 the analogue switching output (pnp/npn) configurable signal can be scaled from 20% of the span up. Switching O Configurable analogue output currents from a few μA up to 500mA can be switched by the output transistors. O Integrated password protection O Attenuation of the output signals, By the use of time tested ceramic or thin film sensors, this up to 20