修正淬火系数法预测中低碳钢淬透性及其应用.pdf

21 4 Vol. 21, No .4 2009 4 Journal of Iron and Steel Research April 2009 1 1 1 1 2 付天亮, 袁 国, 王昭东 , 王国栋 , 王明涛 ( 1. , 110004; 2. , 04 1000) : , , , , , , , , 60% , 6% , : ; ; : T G1 61 :A : 2009) 0400470 Modified Quenching Coefficient Method of ForecastingHardenability of Medium and Low Carbon Steel and Its Application 1 1 1 1 2 FU T ianliang , YUAN Guo , WANG Zhaodong , WANG Guodong , WANG Mingtao ( 1. State Key Laboratory of Rolling and Automat ion, Northeast ern Universit y, Shenyang 110004, Liaoning, China; 2. Linfen Medium Plate Plant, Taiyuan Iron and Steel Group Co, Linfen 041000, Shanxi, China) Abstract:Nowadays, the evaluat ion of medium and low carbon steel hardenability and the hardenabilit y thickness forecast aft er quenching has become a spot light. Modified Grossman method w as used t o analyze the influencing factors of hardenability , such as carbon content and austenitic grain size. At the same time, nonlinear fitting and multivariate analysis method was used to introduce the concept of alloy interaction parameter. On the basis of these measures, the mathemat ic models for forecasting medium and low carbon steel hardenability w ere estab lished. Through comparing the values from forecast model w ith the actual values, superior similarit y was gotten. The average deviation was decreased to 40% of the original values. The conclusion of this t hesis has been used in certain medium plants to evaluate the hardenability thickness after quenching in roller quenching machine, an