AC接入平台命令.pptVIP

WLAN培训——AC接入平台命令 ;AC接入平台常用配置 BNOS# show run this is the running config file config terminal ip dhcp active //启用AC的dhcp// ip dhcp server 20.1.1.1 //配置DHCP服务器IP（AC的某个接口地址）// wlan enable ip nat router //启用NAT// ip nat pool in 200.1.1.0 255.255.255.0 //NAT内部地址范围// ip nat pool out 120.36.2.177 255.255.255.255 //映射后地址范围// system mode fat-ap ip nat inside in out overload interface GigabitEthernet 1/2.0 ip address 20.1.1.1 255.255.255.0 no shutdown duplex auto interface GigabitEthernet 1/0.0 ip address 120.36.2.177 255.255.255.252 no shutdown duplex auto ip nat outside //NAT映射出接口//;ip-pool ap //配置AP地址池，池名为“ap”// ipaddress 100.1.1.1 255.255.255.0 //配置地址池的IP地址范围// alloc-mode localdhcp //配置池模式为localdhcp(由AC分配IP)// default-router 100.1.1.1 //配置地址池网关为“100.1.1.1”// max-lease 3600 //配置地址池的租约单位S（秒）// available-interface port 0-3 //配置设备可通过AC的端口“0-3”获取该池IP地址// option-60 enterprise-code 32870 //配置企业码为32870// option-60 ac-manage-ip 20.1.1.3 //配置APoption发现AC管理平台地址20.1.1.3// option-43 ip-list 20.1.1.3 ip-pool sta //配置用户地址池，池名为”sta“// ipaddress 200.1.1.1 255.255.255.0 alloc-mode localdhcp max-lease 3600 default-router 200.1.1.1 available-interface port 0-3 dns-server 218.85.157.99 //配置用户dns服务器地址// ip route 0.0.0.0 0.0.0.0 120.36.2.178 //默认路由// BNOS# ;查看AC接入平台版本信息及当前模式 BNOS# show system //通过命令“show system”查看// System Mode In Use ---------------------------------------------- Fat Ap //AC当前模式为Fat