FANUC16180i通用故障分析(国外英文资料).doc

FANUC16180i通用故障分析(国外英文资料) The fanuc16/18/0i common failure analysis Display screen alarm 300 series lead the memorized absolute position encoder has been lost, you need to return reference point 1) if there is a reference point, return function, makes the manual return reference point method is as follows: a, remove other alarm, b, put PRM1815 # 5. C, return the reference points manually, d, and press e. (2) if there is no reference point to return, the machine is moved to the mark by the mark position on each axis of the machine. (3) if it is an absolute serial location encoder, it also needs to change the grid deviation value. (PRM1850) # 5 (APCX), 0:1: the location of the incremental encoder position of absolute encoder # 4 (APEX), 0: examination site location have no absolute position encoder parameters. 1: have been identified. String led the memorized absolute position encoder has been lost, need to return reference point (1) if there is a reference point, return function, manual return reference point, the method is as follows: f, remove the other alarm, PRM1815 # 5 g, buy is 0. After manually returning the reference points, I, and pressing the j. (2) if no reference point is returned, the machine will be moved to the mark by the mark position of each axis of the machine. (3) if it is an absolute serial location encoder, it also needs to change the grid deviation value. (PRM1850) PRM1815 # 5 (APCX), 0:1: the location of the incremental encoder absolute position encoder PRM1815 # 4 (APEX), 0: examination site location have no absolute position encoder parameters. 1: have been identified. 2 417 exception alarm digital servo parameter setting, appear alarm (1) please confirm that the following parameter Settings: PRM2020: motor model code PRM2022: PRM2023: rotary direction of motor speed feedback of pulse number PRM2024: position feedback pulse count PRM1023: servo axis PRM2084: flexible feed PRM2085: flexible feed ratio You can also use the diagnosis function o