分油机治理(国外英文资料).doc

分油机管理(国外英文资料) Oil purifier is the key to the ships fuel and lubricating oil purification essential equipment, its function is to isolate the moisture in fuel oil or lubricating oil and impurities, improve the quality of combustion machine and lubrication performance, to ensure the normal operation of the machine. The separation performance of oil separating machine is good or bad for the purification effect of oil or lubricating oil, and it has great effect on the reliability and service life of diesel engine. Therefore, we must pay great attention to the management and maintenance of the oil splitter. Depending on the use, the oil splitting machine can be divided into water purifier and hybrid. According to the weightless ring, it can be divided into the traditional belt and the new type of non-specific ring oil. In the ALFA LAVAL Marine oil division series, the typical representation is the MOPX and FOPX/MFPX products. I round of main engine lube oil circulation tank cleaning system USES a traditional ALFA LAVAL TGT MOPX - 205-24 oil purifier, this type of oil purifier in the operation of the ship used in common, widely used in the fuel oil system and oil system of the ship. 111 voyage, I in the management and maintenance of the roller skating oil found some problems in the process of oil machine, will now experience to communicate with you to solve these problems, to the management level of the common improvement points oil machine. Need of special note is that my wheel main engine lube oil is continuous bypass purification methods used by circulating tank, that is main engine lube oil system is running at the same time, the lubricating oil circulating tank through oil purifier for continuity of purification water and impurities. Carefully adjust the water seal water/flush valve opening. ALFA LAVAL MOPX series of oil purifier general operating from 90 to 120 minutes each a flushing slag discharge, in order to avoid sludge accumulated too much affect the rotation