南京康尼科技有限公司多功能太阳能电源教学_方案1(国外英文资料).docVIP

南京康尼科技有限公司多功能太阳能电源教学_方案1(国外英文资料) Doc documents may have a poor browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. Multi-functional solar experiment box scheme A preface, The size of the photovoltaic system and application forms, such as system size span is very big, small to 0.3 ~ 2 w solar garden light, big to MW of solar photovoltaic power station. Its application forms are diverse, and can be widely used in various fields such as home, transportation, communication and space application. Although the size of the photovoltaic system varies, the structure and the working principle are the same. Contains several of the main components in pv systems: photovoltaic phalanx: component by the solar cell components (also called photovoltaic cell components) on the demand of the system in series, in parallel, in the sunshine of a too converting solar energy into electrical energy output, it is the core component of solar photovoltaic system. Battery: the solar battery components to produce electricity, or in the evening, or when insufficient light load demand is greater than by electricity, solar battery components will be stored energy release the energy to meet the load demand, it is the energy storage component of solar photovoltaic system. Currently used is a lead-acid battery, solar photovoltaic systems for higher requirements of the system, usually by using deep discharge valve control type sealed lead acid battery, deep discharge liquid absorption type lead-acid battery, etc. Controller: it for battery charge and discharge conditions of regulation and control, and according to the load of the electric power demand control sun ChiZu parts and battery to the load power output, is the core of the whole system control part. With the development of solar photovoltaic industry, the function of the controller is getting stronger and stronger, with the traditional control part, inverter, and monitoring