安全帽标准(国外英文资料).doc

安全帽标准(国外英文资料) The Peoples Republic of China national standard GB 2811-89 safety helmet 1 topic content and scope of application This standard specifies the physical properties of the industrial use of helmets, technical performance requirements and inspection rules, management, tags and packaging. This standard is applicable to the safety helmet commonly used in industry, while the other special performance is applicable only to the corresponding special places. Reference standard gb1410-78 solid electrical insulation materials, insulation resistance, volume resistivity and surface resistivity test methods. The term safety helmet is a protective helmet against the external force of the human head. It consists of cap, cap, lower band, rear band, etc. The hood of the cap is covered with a visor, a cap, a top, a vent, an outlet, a plug, and a lower chin strap. A part of the front of the visor of the visor. The hat is sticking out of the outside of the cap. The top reinforcement is used to increase the strength of the top of the cap. The stomata of the rising of the stomatal cap. Insert structure of socket and cap liner and attachment. Open hole connecting cap and cap. The top of the headgear, including the cap band, the belt, the strap, the sweatband, the padding and the bolt rope. The cap hoops around the head to make a fixed band. A belt with direct contact with the top of the head. A rope (belt) with a strap (belt), a strap, a cap and a cap. The perspiration, which is wrapped around the cap band. Cushions of cushioned cap and cap. The rear band has adjustable hoop in the back of the cap. A connection between a cap and cap. The chin strap is attached to the lower chin strap. The clamp card regulates the length of the chin strap. Insert cap and bonnet lining to plug and connect. Tie the cap and cap and the way it is attached. Rivet cap shell and cap lining with the method of rivet riveting helmet worn in horizontal spacing, hat band and the distance between any level