实习参考资料 考试记得准备(国外英文资料).doc

实习参考资料 考试记得准备(国外英文资料) Xiamen hongsheng co., LTD 1. The classification of the relay, solid state relays and power module, signal relay, industrial control relay, automotive relays, power relays, sealed relays and power relay Slow moving: electrical cutting 3. The principle of electrical discharge machining: according to the process to select the shape of the shape of the punch, in the case of the punch and workpiece is very close, at this moment, to punch a pulse of electricity, instantaneous breakdown insulating liquid, thereby erosion surface, to shape. (instant contact) the machining surface of the electric spark shift, the machining accuracy of 0.01 cm insulating liquid is applied: to remove the metal melt and insulation of the surface of the workpiece Grinding machine: wasiano grinder 5. Numerical control machine Mould assembly and modification include the punch and mold two areas Mould heat treatment process: quenching and annealing, and seeding N (purpose: improving the surface hardness of the workpiece) 8. Automatic rolled copper plating nickel machine in the whole production process: mould workshop - wire walking machine - ring is expected to open the coarse - MLCNCK1 roughing - worker grinding processing or car form six face square processing EDM machining - EDN - EDM grinding machine - CNC machining - assemble die - mold heat treatment - TPM - polishing - plating equipment production workshop Mechanical electrical assembly stage: to assemble - component assembly - complete assembly - electrical assembly Debugging phase: single-acting debugging - whole machine debugging - prototype sample Validation phase: trial run - internal validation - shipment validation phase Assembly process: sticky flux - adhered tin - glue - drying - check the pin - point material: copper (copper easily oxidized in the air) in order to prevent the oxidation of the pins are, therefore, should be on the pins before tin detect air cooling, because adhered tin heat conduction, thus af