港口机械特性及谐波治理技术的应用方案和说明(国外英文资料).doc

港口机械特性及谐波治理技术的应用方案和说明(国外英文资料) The application of the port mechanical characteristics and the harmonic management techniques and the instructions. TXT two people quarrel, the person who says sorry first, not to admit defeat, not to forgive. Hes just more appreciative of the relationship than the other. Application of port mechanical characteristics and harmonic management technology The performance of TSC KSCR is compared with the traditional capacitor compensation technology The serial number project Traditional capacitor ark The TSC can be controlled without work compensation one The working principle of Using contactor as capacitor, switch when the power supply system power factor lagging or leading to a certain value, contactor, three-phase average or removal of one or more group of capacitor, is often used to compensate for stable load power factor. Use thyristor for cutting capacitor. When the reactive current increase (decrease) to a fixed value, the controller to output thyristor (or) stopped trigger conduction (or by), and will be put into (out of) capacitor running. Each phase power factor was independently monitored and the various phases were compensated independently. Usually used for impact triphase asymmetrical load. 2 capacitor Switching device There are sparks: Having current, overvoltage, and pollution power supply; The contacts are easy to burn down, short life and require constant maintenance. It is not possible to compensate for the fluctuating load and impact load. The compensation cannot be compensated by the real-time tracking load change No spark; No current overvoltage, no power supply; No contact, no contact burn, long life, no maintenance; Especially suitable for variable load, shock load; The ability to track load changes in real time can be compensated, can be compensated, eliminate three phase unbalanced. 3 Cutting way Manual, semiautomatic, requiring humans duty; The circular casting speed is slow, the control system is complex, easy t