Auto CAD2007(国外英语资料).doc

Auto CAD2007(国外英语资料) 1. toolbar Toolbar Right click on the toolbar directly Commonly used: 1., drawing and modification 2., marked 3. features and layers 2. cursor adjustment Tools, menu bars, tools / options / display / cross cursor sizes / select / pick box size (slightly larger) 3. select the method left key Click Select Frame selection From left to right (blue) contains all objects From right to left (green) as long as you hit the object 4. cancel ESC Delete delete to delete the selected object Undo ctrl+z Redo ctrl+y 5. mouse button Double click all objects as if they were in the screen Scroll zoom objects Press and drag to move the object 6. command bar Where all commands appear, draw objects by looking at the command bar 7. orthogonal F8 Horizontal and vertical states that can only be drawn horizontally and vertically when opened Object capture F3 To find some special points, click the object capture / settings / control point switch Object tracking The function of the ruler is placed on the cursor. Pull out slowly and the ruler will show up 8. determine key The spacebar returns to the right mouse button 9. straight line Specify the starting point, pull out the direction, enter the length, click OK Relative coordinate After you specify the first point in the line, enter the coordinate value (x, y) Note: coordinate is the coordinate of relative starting point Line L 1. angle judgment The zero position is at the horizontal line on the right side of the starting point The angles are counterclockwise, and the clockwise is negative 2. angle input method After the specified starting point, pull out the direction input length shift+ angle value Input length angle ( is less than number) or input length Tab angle * click the OK key again after the command is finished. Repeat the last command Tectonic line XL 1. note The command column appears or or before as the current command, which can be operated directly Or after the command for the expansion command, right-clic