14 实验：用打点计时器测速度3(国外英语资料).doc

14 实验：用打点计时器测速度3(国外英语资料) 14 experiment: with a timer to measure speed, 3.txt wait too long to get things, most of them have not originally wanted. A layer of a cool autumn rain, a valve and a fragrance, as time since unforgettable, a busy but nowhere to hide. Happy life nine words: there is hope, something to do, someone to love. Women and women as friends, to the attitude of the green leaves, but also hidden red flowers scheming. 1.4 experiment: use the timer to measure speed 3 Comprehension The objective of this experiment is to read the instrument through textbooks and reading the illustrated card. Mastering the use of RBI timer in paper Take the skills of recording time and displacement, and use this technique to determine the average speed, draw an image, and learn to use the image Methods of investigating physical problems. Basic level Whats the use of the 1. point timer? The tape is joined to the moving object, that is, the object drives the tape to move together, so that the timer is punched on the tape A series of dots; the distance between the points on the tape represents the displacement of the object at the corresponding time interval. So, dot the timer An instrument is a device for recording the displacement of an object within a definite time interval. 2. the working principle of point timer There are two kinds of dotting timers commonly used in Physics Laboratory in middle school, namely electromagnetic dotting timer and electric spark timer. There is a coil in the solenoid point timer, and the vibrating plate is inserted in it (see Figure 1.4 - 1). When the coil is connected When the current is supplied, the vibrating plate is magnetized repeatedly, which is equivalent to the N pole of the magnet for a while, and is opposite to the S pole of the magnet for a while. Thus, under the action of a permanent magnet (polar invariant), the vibrating piece vibrates and drives the vibrating needle to vibrate up and down. An electric spark timer is a paper dis