计算机的相关知识(国外英语资料).docVIP

计算机的相关知识(国外英语资料) Try repairing the system 1, the boot press F8 do not move to the advanced option appears to let go, select the latest correct configuration, carriage return repair. 2, boot, press F8 into safe mode, in the exit, select the restart or shutdown, at boot, you can enter the normal mode (repair the registry). 3, if the fault still, to restore the system you use the system comes with the reduction, when you did not appear the fault repair (if normal mode recovery fails, please press the F8 boot into safe mode to use system restore). 4, if the fault still, using the system disk repair, open a command prompt input SFC /SCANNOW return (SFC and / or between a space), insert the original system disk repair system, the system will automatically compare repair. 5, if the fault is still, set up CD-ROM in BIOS for the first boot device, insert the system installation disk, press the R button, select repair installation. 6, if the failure is still recommended reinstall the operating system. If it is not recommended to repair the installation, so that the repair of the system, and can make the C programs and files from loss. Broadband Internet fault diagnosis method is as follows (take ADSL as an example) (1) first check the telephone line without question (you can dial a telephone test), if normal, then check the signal frequency divider is connected properly (including telephone line is connected with the Line port, the telephone is connected with the Phone port, ADSL Modem port Modem). (2) if the signal divider is connected, then check the ADSL Modem Power (power) indicator light is bright, if not bright, check the `ADSL Modem power switch is turned on, whether the external power supply plug good etc.. (3) if the light, then check the LINK (synchronous) the status indicator is normal (Chang Liang flashing); if not, check each ADSL Modem connection line is normal (from the signal frequency divider is connected to the ADSL Modem line is connected to the Line port,