HL数字控制编程系统使用说明(国外英语资料).doc

HL数字控制编程系统使用说明 1 system profiles: This system is a relatively advanced control system of wire cutting machine at home. It has powerful function, high reliability, strong anti-interference ability and stable cutting and tracking. The hardware, software and interface circuits of the system are all concentrated on one piece of card. The structure is compact, the installation and connection are simple, and the maintenance is convenient. System configuration of the computer is not high, use 486 / 586 can do without hard disk, floppy disk can run. The system prompts in English and Chinese, friendly interface, easy to learn. 2 main functions: 1, a control multi-function, in a computer can control at the same time as many as four machine tools, cutting different workpieces, and can be processed side Programming side. 2 、 taper processing adopts four axis / five axis linkage control technology. Two kinds of taper processing methods, such as up and down special shape and simple input angle, make the taper processing become quick and easy. It can be used as variable cone and equal arc machining. 3, analog processing, can quickly display the processing trajectory, especially the taper and the upper and lower special-shaped workpiece on the upper and lower processing trajectory, and show the end of coordinate results. 4, real-time display of graphics processing process, by switching the screen, can simultaneously monitor four processing state machine, and display the relative value X, Y, J coordinates and absolute coordinates of X, Y, U, V and other changes. 5, power failure protection, a sudden power failure, such as the processing process complex, automatic recovery processing state of each machine tool. Documents stored in the system can be retained for a long time. 6, the reference surface and the wire frame distance corrected calculation of tangent offset wheel U and V direction of compensation, so as to improve the machining accuracy, large taper cutting accuracy is much b