ospf-12考题(国外英语资料).doc

ospf-12考题 judge 1, in the OSPF protocol, there is no ASBR in the NSSA region, but there can be ABR. Correct error 2, two switches directly enabled OSPF, connected VLAN three layer interface Netmask inconsistent, one is 255.255.0.0, one is 255.255.255.0, OSPF neighbor state can not reach the full state. () Correct error 3, OSPF filtering method is one of the filtering of LSA, this way is not to filter the LSA, just to prevent the generation of LSA, without LSA, the corresponding will also affect other regions or autonomous routers. () Correct error 4, there are two ABR in the stub region of OSPF, and the default routes they generate may cause them to point to each other and form loops. () Correct error 5, there are two ABR in the stub region of OSPF, and the default routes they generate do not allow them to point to each other, thus forming loops. () Correct error Multiselect 1, a router running OSPF, its two normal work interface, one belongs to region 0, the other belongs to region 9, and introduced 5 static routing, then the router will generate what LSA? () A, Router, LSA (Type = 1); B, Network, LSA (Type = 2); C, Network, Summary, LSA (Type = 3); D, ASBR, Summary, LSA (Type = 4); E, AS, External, LSA (Type = 5); 2. About the adjacency relation between routers in OSPF protocol (adjacency), the following are correct: () A, two routers, as long as the two-way neighbors (mutual received the other partys Hello message), automatically become an adjacency relationship If the B and two routers are mutually adjacent, then the network (underlying) type between them may be point - to - point If the C and two routers are mutually adjacent, then the network (underlying) type between them may be Point-to- MultiPoint D and only two routers are adjacent to each other, exchanging LSA information between them 3, in 0SPF, the following network type needs to pick a DR: () A, NBMA B, radio; C, point to multipoint: D, point-to-point; 4, the following statement about DR in OSPF networ