斗鱼(国外英语资料).docVIP

斗鱼Thailand fish breeding is not difficult to breed before Thailand Betta, should first choose the right Thailand Betta fish. As a mature male in Thailand should be very active and healthy fish, if the individual is too thin or lying in the corner of the aquarium is not good at play, or even to other Thailand Betta provocation can make normal response in Thailand is not suitable for male Betta Fish breeding. Thailand Betta female health pick apart the other considerations, but also focus on female belly full state, if found out near the anus resistfemales abdomen a little white fallopian tube, is a sign that is about to enter the pre production period. The other should also pay attention to: the size and difference between male and female male can not be too large, so as to avoid the mating process of battle casualties, at the same time with the best male lines consistent. After the selection of Thailand Betta Fish should choose a capacity of not less than 8 - 12 Liter Aquarium as breeding cylinder, water breeding tank should not be too high. At the same time, the water temperature is controlled at about 25 DEG C, and the water hardness is 6-8 and the pH value is about 6.5 - 7.5. Usually, the breeding in Thailand Betta is cylinder do not need to set the pump assisted water dissolved oxygen, because continuous gas supply would increase the surface fluctuations, resulting in Thailand. A bubble nest Betta hard drifting and not easy to agglomerate. If in order to maintain the cleanliness of the water, can also be in the breeding tank is provided with a pneumatic sponge filter to maintain on stability of water quality, but the premise is the amount of gas should not be too large. In the breeding tank, also need to put some water, floating on the surface of the grass will help Thailand Betta structure bubble bubble nest nest and easily condensed, placed in the water plants can occur immediately hide battle Thailand Betta mating process convenient, such as water is the most