环保新产品——发泡混凝土砌块(国外英语资料).docVIP

环保新产品——发泡混凝土砌块 Compared with the traditional wall insulation box and aerated concrete block, the foamed concrete block is more environmentally friendly product, not only that, but the thermal insulation technology of foamed concrete block is better. The author is excited to find such a new type of environmental protection material in the updated environmental news every day. This product is now being expanded and put into use in a wide variety of buildings. Foaming concrete lightweight block, is mainly composed of cement, sand, foaming agent and water as the main raw material, through scientific preparation, a green new wall material and high pressure foaming and mix all made of radionuclides, in line with GB6566 standards, the use of unrestricted. Because of the light weight of foamed bricks, thereby reducing the buildings dead weight and improving the seismic performance, the same building structure can increase the seismic grade by using clay brick two. Excellent processing properties of foamed concrete brick users, security design and construction requirements, can be arbitrary cutting (cutting, sawing, nailing, Nian Junke), give you the water and electricity installation, convenience of home decoration. Cement foam concrete block and brick masonry mortar joint economic comparison when reduced, the use of red brick per square to 0.2 cubic meters of mortar, the use of foam concrete block wall is only 0.06 cubic meters per cubic metre of mortar, masonry mortar can be saved per cubic cost about 14 yuan. The plastering mortar can be reduced by about 1/3, because the production specification of the mould is extremely smooth, the error is within the range of + 1MM, and the per cubic block plastering can save about 8-10 yuan more than that of the red brick. Transport labor savings, because cement foam concrete block itself light weight, such as floor height, large amount of use, save labor, carrying about 30% of wages. Are aging fast, can greatly save the time, from t