- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
AS1801-BTDT;中文规格书,Datasheet资料
Datasheet
AS1801
Ultra-Low Power, I²C Serial Real-Time Clock with Trickle Charger
1 General Description 2 Key Features
The AS1801 serial real-time clock is a low-power clock/calendar with Real-Time Clock (RTC) counts seconds, minutes, hours, day,
two programmable time-of-day alarms and a programmable square- date, month, and year with leap-year compensation valid up to
wave output. Address and data are transferred serially through an 2100
I²C bus. 24-hour / 12-hour format with AM / PM indicator
The clock/calendar provides seconds, minutes, hours, day, date, Trickle-Charger
month, and year information. The date at the end of the month is
automatically adjusted for months with fewer than 31 days, including I²C Serial Interface
corrections for leap year. The clock operates in either the 24-hour or Two Time-of-Day alarms
12-hour format with AM / PM indicator.
Oscillator Frequency Trimming (every 8 seconds, every 2 days)
The AS1801 provides a clean clock/calendar start function by
clearing the ‘wait_for_start’ flag in the control register. The flag is set Oscillator Stop Flag (deep power down detection)
whenever a clock/calendar setting takes place and the counter Wait-for-Start Flag for clean clock start
operation is stopped until restarted by clearing the flag.
Back-up counter allows long access times (1s) of the serial
In addition to the basic timekeeping functions the device offers dual interfaces
power pins for primary and backup power supplies as well as a
Programmable Square-Wave Output - Defaults to 1Hz on
trickle charger at pin VBAT for the backup battery.
Power-up
The AS1801 pr
文档评论(0)