ADCP 流量测验步骤培训讲义.pptVIP

ADCP 流量测验步骤 ADCP 培训之六 ADCP 流量测验步骤 室内准备 现场准备 数据采集步骤 室内准备 Example: a site with name “Illinois river at Henry, IL”, using mode 1 Output directory: d:\Adcpdata\data\Henry Config file directory: d:\Adcpdata\configs Log file directory: d:\Adcpdata\logfiles Filename prefix: henr_ Starting Config file: henr1.wrc Self-test: 010802.tst Field Preparation Setup ADCP Attach cables and place in ADCP mount, attach safety line Connect power supply Deploy ADCP in the water Run self-test (BB-Talk Script) Record self-test in a log file Store log file according to policy Example: CHIRtst Setup or load configuration file Composite Tabular View * 10/17/98 Develop a system for naming and storing ADCP data (rawdata, configuration, and log files) Prepare configuration files Be prepared to change as necessary in the field Determine file numbering to use Old method required putting last data file on laptop to keep continuous number WinRiver allows the user to set the starting number for the data files to be entered in the configuration, recording dialog Use an ADCP checklist to prepare for trip. Before leaving the office, use the computer you will use in the field to: Check cable connections Check communication Check ADCP clock Run a self-test Office Preparation Office Preparation Consider field conditions that will be encountered Water velocity Need trolling motor? Need tagline? Need GPS? Weather Raingear Cover for computer (rain or sun) Boat Gas Battery power Mount Safety line Check ADCP w/ WinRiver Verify communication Check/set ADCP time Measure ADCP depth Account for roll of boat during measurement Update ADCP depth Locate good section Select measurement site with uniform flow, no rapid drop-offs Minimize unmeasured area Determine max profiling depth Field Preparation Modify config file Set depth cell size (WS) Set number of depth cells (WN) to ensure profiling to the maximum depth Adjust ambiguity velocity (WV) to be approximately equal to the maximum water vel