Hose swivel joint-软管旋转接头.pdfVIP

Hose swivel joint Swivel joint for direct installation in the hose line Torsion protection that is fitted directly in the hose – uni- versally deployable for hose lines that are moved at regular intervals, such as those in loading, filling, and tanking systems or mixing stations. RS hose swivel joints are swivel joints with an integrated hose such as tensile forces, abrasion, bending or torsion. Some prob- support. The direct connection to the hose line is similar to the lems can be alleviated by proper handling. However, they can also hose couplings in accordance with EN ISO 14420-2 (DIN 2817) for be solved – by using suitable fittings and systems by RS. Take the the SDL hose swivel joint or in accordance with EN ISO 14423 (DIN torsion problem, for example. RS has it all figured out and simply 2826) for the SDS hose swivel joint. Its use means that an addi- transfers the rotary forces from the overloaded hose to fittings tional fitting is no longer required. The resulting interface, which that are specially designed for the purpose. can form an additional wear point or a potential leak, is thus also The advantage is obvious: The once-off investment in high-quality eliminated. Particularly when dealing with steam, hose swivel and long-lasting swivel joints turns the consumable hose into joints are a popular variant. They are used in the chemicals sector, longer-lasting component of the hose line. And a long-lasting in plant engineering and power plant construction and in hose product represents a pure cost saving. stations. Hoses are an investment. However, the situation is often different Hoses are designed to convey all types of media flexibly from in practice. Careless handling quickly leads to damage, therefore A to B. Depending on the formulation, they must withstand res