CISCO培训机构助教NA笔记3(国外英语资料).docVIP

CISCO培训机构助教NA笔记3(国外英语资料) All routers know area, and the other routers through the study of LSA, SPF calculation again, and then in the routing table correctly reflect the changes of the routing information. Avoid routing loops completely: Router based on LSA from other routers learn, make themselves know the topology of the network. Therefore, just like aging spanning tree, constructed a completely without the loop topology spanning tree. The link-state routing protocol itself has a powerful mechanism for reliability: each LSA has a source and a serial number that ensures the new and old LSA through serial Numbers. The LSA must also be confirmed to ensure that the LSA information is accurate. Has strict requirements to the network design, because of layered, address assignment and summary, which is the lifeblood of link-state routing protocols, requirements engineers have abundant knowledge and professional experience. Hierarchical routing protocol (which focuses the topology changes on the local level and doesnt cause the entire web to turn) Balanced hybrid routing protocol: EIGRP Configure RIP Supports equivalent overhead load balancing with up to 6 defaults for up to 4 Route updates are sent regularly every 30 seconds The Router rip No auto - the summary Version 2 Network, XXX, XXX, XXX. XXX Network: the interface to which the Network corresponds is involved in the selection protocol Update the corresponding information in the routing table You can only publish the main class network number RIPV1 RIPV2 Sh IP separate protocols Suppress time invalid time 180 seconds refresh time 240 seconds Sh IP route The debug IP rip RIPV2 USES the multicast address, The Clear IP route * Refresh routing table Configure EIGRP Fast convergence: dual [dispersion correction algorithm] for rapid convergence 1. Multicast means to send hello package 0 to the active interface to build a neighbor 2. The routing information is sent to the neighbors and the neighbors save the routing info