PIC18模块程序(国外英语资料).docVIP

PIC18模块程序(国外英语资料) The basic modules of 18F are all included, and the test passes, and the main program can call each program! The compiler USES PICC18 / / the program is mainly used for the 18F single chip machine learning # include pic18.h / / 18 series of single-chip header files Its a function of -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Void delay (unsigned int rr); Void timer1 (void); Void SPI_Iint (void); / / serial SPI output setting functions Void the display (void); Void i2cint (void); / / i2c bus initialization program Void c64R (void); / / i2c interfaces EEPROM memory (read program) Void c64W (void); / / write programs Void Start (void); / / the start bit sends function Void Stop (void); / / stop the sending function Void WriteWait (void); / / wait function Void Senddata (unsigned char data); / / data send function Void Restart (void); / / restart the function Void Datain (void); / / read in Void Uartint (void); / / generic synchronous/asynchronous receiver initializer Void Udatas (unsigned char dad); / / UART data send Void Uartrs (void); / / serial port accepts data send function Void ADint (void); / / AD module initialization Void shuchai (void); The data register definition -- -- -- -- -- -- -- Const unsigned char table [10] = {0xee, 0x82, 0xdc, 0xd6, 0x7e, 0x7e, 0xfe, 0xf6} / / display segment code Unsigned char buf [5]. / / display cache Unsigned char receive [10]. / / define receive cache Unsigned char dd. / / timer 0, interrupt counting registers Unsigned char save; Unsigned char conet; Unsigned char * Counter; / / receive data Pointers Unsigned char DADh; / / AD cache, Unsigned char DADl; Unsigned int Dat. Unsigned int Dat1; / / save the last AD conversion value for the ratio Volatile bit DADflage; / / AD conversion mark Volatile bit I2Cerror; / / I2C error mark Volatile bit Uartsend; / / asynchronous serial port data to send permissio