TFT-LCD的数据接口种类(国外英语资料).docVIP

TFT-LCD的数据接口种类(国外英语资料) One, all tft-lcd data interface types: Single TTL6 (8) Double TTL6 (8) Single LVDS6 (8) Double LVDS6 (8) Single TMDS6 (8) Double TMDS6 (8) And the latest standard RSDS Six and eight is used to indicate how much screen can display colors, six screen can display color for 2 power 6 X2 power 6 X2 power 6 represent the R, G, B three colors it six screen can display the color to a maximum of 262144 kinds of color, eight screen forcolours. The screen shows how many colors are associated with the number of screens. The screens we used were generally 6 bits. Early computer is done with 12 inches below the screen, this kind of screen resolution is 640 x480 commonly (VGA) 800 x600 (SVGA), the interface for single TTL6, screen and 31 for 41 needle stitches, 12 inches in the majority with 41 needle (800 x600), 10 inch in the majority with 31 needle (640 x480). The TTL signal is the standard signal that the tft-lcd can recognize, even if the LVDS TMDS used later are encoded on its basis. TTL signal lines a total of 22 root (at least, not counting and power) of the other R G B three primary signal, two HS VS line sync signal, can make a data signal DE a clock signal CLK, of which R G G three colors each of the colors according to the digits different screen, and has a different number of cable (6, and 8) six screen and eight screen three colors with R0 -- R5 (R7) G0 - the G5 (G7) B0, B5 (B7) tricolor signals is color, after get blank brains make the screen color aberration. The other four signals (HS VS DE CLK) are the control signals, and the errors will make the screen not bright and not properly displayed. Because the TTL signal level is about 3V, it has a large effect on high speed long-distance transmission, and the anti-interference ability is also poor. So there is a screen for the LVDS interface, as long as the screen for the above rate of the XGA is using the LVDS method. LVDS also has a single channel, a dual channel, 6 bits, 8 bits, an