Windows7-启动配置(bcdedit)(国外英语资料).docVIP

Windows7-启动配置(bcdedit)(国外英语资料) Windows 7 - launch configuration (bcdedit) (2009-11-11 14:02:14) reprint labels: talk Note that BCDEdit is not a program running under a graphical interface, but a command line tool (BCDEdit. Exe) is located in \ Windows \ System 32 under the directory. To execute BCDEdit, you should first enter the command line window and raise the operator to administrator rights. In the command line window, go to the system directory like C: / Windows/system32 and then type bcdedit. BCDEdit command profile With the command line tool Bcdedit, we can add, delete, and modify objects in the BCD (Boot Configuration Data). In BCD, each object has only the GUID (Globally Unique Identifier: Globally Unique Identifier), such as system of each of the hard disk drive, each partition GUID (Globally Unique Identifier) are not the same. In BCD, the GUID of a hard disk or partition can be divided into the following categories: Refers to a hard drive or partition that exists in Windows XP, Windows XP. : the default disk or partition; The operating system The current hard drive or partition; The GUID, similar to this format, refers to other hard drives or partitions that have an operating system installed. Note: this is just an example, depending on the hard disk or partition parameter, but it will be similar to the format. BCDEDIT command Bcdedit /? Display command help Bcdedidit. Exe /? CREATESTORE: shows the detailed information of the command parameter CREATESTORE - and, of course, CREATESTORE is just the sample, used for any other available parameters all can use a similar format to check the details of the parameters. Bcdedit or bcdedit/enum all: display the current Windows Vista system startup Settings data, then all installed in the system hard drive or partition of the operating system will display the corresponding GUID identifier, such as. Backup and restart options with BCDEdit Before you modify the launch options for Windows Vista, its best to make a b