寺岗80称设置1(国外英语资料).docVIP

寺岗80称设置1(国外英语资料) The site is called 80, 90 and 100 Model: sm-80pcs sm-90pcs sm-100 The model can look at the nameplate on the left and see if there is a key on the keyboard National version initialization Note: 1, the new balance must set the basic function. Basic functions must be set after the national release. The national version will clear the system Settings and function Settings, so do not do it easily. Enter Z mode four times, then open the calibration switch at the bottom of the scale. 2, then hold down the zero dont put the input at the same time [8822] screen appears SPEC 3 - CN COUNTPY input [3] (3 on behalf of the Chinese version) and print, the screen appears the SPEC Y - N - C T, press clear After you have a SCALE TYPE on the screen, you switch the machine model POLE (with arm). The SELF - S scale (S). Casse-b (old 80/90bcs). CASSE - P (the old 74 key 80/90pcs). B - CS (platform 80/90bcs). P - CS (PCS) with arm 80/90 PCS type (PCS) is selected according to the print with X key to switch range 15 kg then [print], reoccupy [X] key selection index value (s) 1/7500 print to confirm and save the Settings. Press the key to clear the memory, wait for a few seconds and the system will automatically return to the Z mode, twice. The national version will clear the system Settings and function Settings, so do not do it easily. After the national version is initialized, you need to reset the 141 and 142 functions. Basic functionality Settings One, 141 function Settings Go to the Settings: four times, then hold [the zero] and lose [141], then follow the following table operation: The SPEC00X4 simple bar code is set to: f1f2cccxxxxx C/D The SPEC24X16 single-label format is set to format 1 The SPEC49X2 method is set to Ethernet double stranded wires SPEC64X1 prohibits password Settings (= 0 allows) The setting of SPEC135X02 scale SPEC141X1 four years of printing (= 0 two years of printing; = 1, 4 years of printing) SPEC142X1 allows the retention date to exceed 90 da