模态分析的发展与分类(国外英语资料).docVIP

模态分析的发展与分类(国外英语资料) Development and classification of modal analysis. TXT Modal analysis can be divided into computational modal and experimental modal analysis, and its structural dynamic characteristics are characterized by modal parameters. In math, modal parameters is mechanical system movement differential equations of characteristic value and characteristic vector, namely, to know the structure of geometry, material properties, boundary conditions and the structure of the mass, stiffness and damping distribution respectively with mass matrix and stiffness matrix and damping matrix, so that there is enough information to determine the system modal parameters (natural frequency, damping ratio and modal vibration mode). The theory proves that these modal parameters can fully describe the dynamics of the system. Experimentation, it comes from the certain point on the measurement structure dynamic input force and output response, and will generally will get the data into a frequency response function of measurement. Theory has been proved that the frequency response function can be expressed with modal parameters, so the experimental modal analysis of the second step is from the measured frequency response function to estimate the modal parameters. Modal analysis is a synthesis of several engineering disciplines, including structural dynamics theory, digital signal processing, system identification and test technology. As to expanding the research scope of modal analysis, from the system identification to the structural sensitivity analysis and dynamic modification, etc., the modal analysis technology has been generalized in geography The solution is to identify the dynamic characteristics of the mechanical system and most of the areas involved in the application. In this chapter, the basic theory of modal analysis is briefly introduced in the analysis of modal analysis and experimental analysis. On the modal analysis theory to do the following three basic assumpti