DAVICQPSKDemodulator–ModelD94.PDF

Data Sheet DAVIC QPSK Demodulator – Model D9494 The QPSK Demodulator Model D9494 is an integral component of Scientific Atlanta’s Digital Headend product line. This device works in conjunction with the QPSK modulator and digital set-tops to provide forward signaling and reverse path communications for interactive video and data systems over a two-way CATV network. Combined, the QPSK demodulator and QPSK modulator create a DAVIC-compliant headend QPSK signaling hub. Features ● Interfaces with the QPSK Modulator (model D9482) through ATM-25 interfaces to create a DAVIC-compliant headend signaling hub ● Provides Reed-Solomon error correction for improved performance ● Provides simple-to-use front panel controls for easy operation ● Provides provisioning, control, and status monitoring information through interface to the QPSK Modulator (model D9482) from remote Ethernet access Product Specifications Table 1. Product Specifications Specification Value RF Tuner Frequency Range 5.00 to 42.00 MHz Tuning Step Size 250 kHz Tuner Input Ranges -13 to +3 dBmV (range 1) -5 to +11 dBmV (range 2) +3 to +19 dBmV (range 3) +11 to +27 dBmV (range 4) Maximum Input Power 35 dBmV (range 4) over specified tuner frequency range Input Return Loss 12 dB Tuner LO Leakage at Input -15 dBmV (range 1) Maximum Co-channel -16 dBc for BER ≤ 1x10-8 Single-tone Interferer Maximum Total Adjacent +14 dBc at nominal carrier input level (no in-band noise) Similar QPSK Carrier Power for BER ≤ 1x10-8 Page 1 of 2